Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › from 2020.12
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298067 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

When installing the name plates, heat the vehicle body, back door outside garnish and name plates using a heat light.


Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
·

Back Door Outside Garnish

·

Name Plate


20 to 30°C (68 to 86°F)

CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts, touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the vehicle body, back door outside garnish or name plate excessively.


PROCEDURE

Hide 75441C 1.INSTALL BACK DOOR NAME PLATE (for GR SPORT)

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any remaining double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a heat light, heat the vehicle body and a new back door name plate.


c.

Remove the release paper from the back door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.

Install the back door name plate as shown in the illustration.

B590446C01
5.594,2.177 5.844,2 true 5.427,1.469 5.688,1.729 true 4.875,2.427 4.542,2.135 true 3.833,0.385 4.146,0.583 0.313,0.198 10 true *a 5.354,2.26 5.49,2.448 0.135,0.188 10 true A 5.938,1.333 6.073,1.479 0.135,0.146 10 true B 5.844,2.625 5.979,2.781 0.135,0.156 10 true C 5.885,1.906 6.073,2.052 0.188,0.146 10 true *b 5.24,1.365 5.417,1.531 0.177,0.167 10 true *b 4.354,2.021 4.552,2.219 0.198,0.198 10 true *c
*a Reference Values *b Specified Installation Position
*c End of R - -


Standard Measurement:
Area Measurement Area Measurement
A 19.8 mm (0.78 in.) B 59.9 mm (2.36 in.)
C 58.7 mm (2.31 in.) - -



Hide 75431A 2.INSTALL NO. 1 BACK DOOR EMBLEM

a.

Clean the back door outside garnish surface.

i.

Using a heat light, heat the back door outside garnish surface.


ii.

Remove any remaining double-sided tape from the back door outside garnish.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a heat light, heat the back door outside garnish and a new No. 1 back door emblem.


c.

Remove the release paper from the No. 1 back door emblem.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.
B458672C01
0.448,3.854 0.677,3.469 true 2.896,3.885 2.677,3.469 true 0.344,3.875 0.656,4.073 0.313,0.198 10 false *a 2.865,3.938 3.177,4.135 0.313,0.198 10 false *a
*a Location Pin


Engage the location pins and install the No. 1 back door emblem as shown in the illustration.


Hide 75444A 3.INSTALL NO. 4 BACK DOOR NAME PLATE (for AWD)

a.

Clean the vehicle body surface.

i.

Using a heat light, heat the vehicle body surface.


ii.

Remove any remaining double-sided tape from the vehicle body.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a heat light, heat the vehicle body and a new No. 4 back door name plate.


c.

Remove the release paper from the No. 4 back door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.

Install the No. 4 back door name plate as shown in the illustration.

B458676C01
4.094,0.104 4.406,0.302 0.313,0.198 10 false *a 4.292,1.438 4.479,1.625 0.188,0.188 10 true C 5.313,0.854 5.5,1.042 0.188,0.188 10 true A 6.167,1.417 6.354,1.604 0.188,0.188 10 true B
*a Reference Values - -


Standard Measurement:
Area Measurement Area Measurement
A 115.9 mm (4.56 in.) B 22.4 mm (0.88 in.)
C 23.9 mm (0.94 in.) - -



Hide 75441E 4.INSTALL NO. 1 BACK DOOR NAME PLATE

a.

Clean the back door outside garnish surface.

i.

Using a heat light, heat the back door outside garnish surface.


ii.

Remove any remaining double-sided tape from the back door outside garnish.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a heat light, heat the back door outside garnish and a new No. 1 back door name plate.


c.

Remove the release paper from the No. 1 back door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.

Install the No. 1 back door name plate as shown in the illustration.

B458673C01
4.094,0.073 4.406,0.271 0.313,0.198 10 false *a 3.979,1.021 4.167,1.219 0.188,0.198 10 true A 6.198,0.938 6.385,1.135 0.188,0.198 10 true B 4.625,1.74 4.813,1.938 0.188,0.198 10 true C
*a Reference Values - -


Standard Measurement:
Area Measurement Area Measurement
A 57.0 mm (2.24 in.) B 85.5 mm (3.37 in.)
C 83.2 mm (3.28 in.) - -



Hide 75442A 5.INSTALL NO. 2 BACK DOOR NAME PLATE

a.

Clean the back door outside garnish surface.

i.

Using a heat light, heat the back door outside garnish surface.


ii.

Remove any remaining double-sided tape from the back door outside garnish.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Using a heat light, heat the back door outside garnish and a new No. 2 back door name plate.


c.

Remove the release paper from the No. 2 back door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



d.

Install the No. 2 back door name plate as shown in the illustration.

B458675C01
4.094,0.083 4.406,0.281 0.313,0.198 10 false *a 4.646,0.865 4.865,1.063 0.219,0.198 10 true A 6.031,0.865 6.25,1.063 0.219,0.198 10 true B
*a Reference Values - -


Standard Measurement:
Area Measurement Area Measurement
A 65.1 mm (2.56 in.) B 113.7 mm (4.48 in.)