Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR OUTSIDE MOULDING › from 2020.12
RM32H0E _59 Vehicle Exterior _060783 EXTERIOR PANELS / TRIM _0298081 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 75734C 1.INSTALL FRONT DOOR REAR OUTSIDE MOULDING (w/ Plated Moulding)

a.

When using a new front door outside moulding:

i.

Clean the surface of the front door outside moulding.



b.

When reusing the front door outside moulding:

i.

Remove the double-sided tape from the front door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new front door rear outside moulding.

i.

Remove the release paper from the front door rear outside moulding.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B587971C01
1.052,0.635 0.604,0.365 true 2.896,0.729 2.719,0.656 false 0.427,0.25 0.74,0.406 0.313,0.156 10 false *a 2.938,0.698 3.25,0.854 0.313,0.156 10 false *b 1.198,0.427 1.396,0.594 0.198,0.167 10 true *c 2.729,0.25 3.042,0.406 0.313,0.156 10 false *d
*a Mark-off Line
*b Front Door Outside Moulding Edge
*c 2.3 mm (0.0906 in.)
*d 1.1 mm (0.0433 in.)


Install the front door rear outside moulding as shown in the illustration.



Hide 75734C 2.INSTALL FRONT DOOR REAR OUTSIDE MOULDING (for GR SPORT)

a.
B590448

Engage the claws to install the front door rear outside moulding.


Hide 75392F 3.INSTALL OUTSIDE MOULDING RETAINER (for TMMT Made)

a.

When using a new front door outside moulding:

i.

Clean the surface of the front door outside moulding.



b.

When reusing the front door outside moulding:

i.

Remove the double-sided tape from the front door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new outside moulding retainer.

i.

Remove the release paper from the outside moulding retainer.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B458719C02
0.583,0.896 0.417,1.167 0.417,1.167 0.667,0.979 true 2.833,0.917 3,1.167 3,1.167 2.75,1 true 3.021,1.063 3.188,1.229 0.167,0.167 10 true *a 0.75,0.656 0.917,0.823 0.167,0.167 10 true *b 0.24,1.063 0.406,1.229 0.167,0.167 10 true *a 2.51,0.677 2.677,0.844 0.167,0.167 10 true *b
*a Mark-off Line
*b 4.0 mm (0.157 in.)


Install the outside moulding retainer as shown in the illustration.



Hide 75793 4.INSTALL FRONT DOOR UPPER OUTSIDE MOULDING PAD

a.

When using a new front door outside moulding:

i.

Clean the surface of the front door outside moulding.



b.

When reusing the front door outside moulding:

i.

Remove the double-sided tape from the front door outside moulding.


ii.

Wipe off any tape adhesive residue with cleaner.



c.

Install a new front door upper outside moulding pad.

i.

Remove the release paper from the front door upper outside moulding pad.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.



ii.
B458720C07
2.719,0.573 2.417,0.833 2.417,0.833 2.927,0.698 true 0.969,0.458 1.167,0.583 1.167,0.583 0.885,0.542 true 2.219,0.76 2.385,0.927 0.167,0.167 10 true *a 1.063,0.208 1.375,0.365 0.313,0.156 10 false *b 2.833,0.365 3.146,0.521 0.313,0.156 10 false *c 1.177,0.458 1.344,0.625 0.167,0.167 10 false *a
*a Mark-off Line
*b 3.0 mm (0.118 in.)
*c 23.0 mm (0.906 in.)


Install the front door upper outside moulding pad as shown in the illustration.