2006-2011 Camry Aurion · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

  1. C110340E41
    Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.
    Standard resistance: 
    Tester Connection
    Shift Position
    Specified Condition
    1 (RB) - 3 (PL)
    4 (B) - 9 (L)
    P
    Below 1 Ω
    Except P
    10 kΩ or higher
    2 (RL) - 1 (RB)
    R
    Below 1 Ω
    Except R
    10 kΩ or higher
    1 (RB) - 8 (NL)
    4 (B) - 9 (L)
    N
    Below 1 Ω
    Except N
    10 kΩ or higher
    1 (RB) - 7 (DL)
    D, S, "+" and "-"
    Below 1 Ω
    Except D, S, "+" and "-"
    10 kΩ or higher
    If the operation cannot be done as specified, replace the park/neutral position switch.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →