2006-2011 Camry Aurion · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built Jun 2006 – May 2009

HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures listed below are for the LH side.


1. REMOVE FRONT WHEEL

2. DRAIN BRAKE FLUID

NOTICE:
If brake fluid leaks onto any painted surface of the vehicle, wash or remove it completely.


3. REMOVE DISC BRAKE CYLINDER ASSEMBLY

  1. C143471
    Remove the union bolt and 2 gaskets from the disc brake cylinder assembly, then disconnect the front brake flexible hose.

  1. C143469E01
    Hold the front disc brake cylinder slide pin and remove the 2 bolts and disc brake cylinder assembly.

← COMPONENTS (Jun 2006 – May 2009)DISASSEMBLY (Jun 2006 – May 2009) →