INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| 1.
INSTALL REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler) |
 |
- Engage each claw.
Install the rear bumper assembly with the 6 screws and 2 clips.
- Install the 2 rear bumper plates.
w/ Clearance Sonar System:
- Install the grommet
Connect the connector.
| 2.
INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH (w/o Rear Lower Spoiler) |
 |
- Install the rear quarter panel mudguard sub-assembly LH with the 3 screws.
| 3.
INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH (w/o Rear Lower Spoiler) |
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 4.
INSTALL REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler) |
 |
- Engage each claw.
Install the rear bumper assembly with the 6 screws.
- Install the 2 rear bumper plates.
w/ Clearance Sonar System:
- Install the grommet
Connect the connector.
| 5.
INSTALL REAR FLOOR BOARD (w/ Rear Lower Spoiler) |
 |
- Install the rear floor board with the 3 nuts, 2 clips and 4 screws.
| 6.
INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Clearance Sonar System)
|
 |
- Install the luggage compartment inner trim cover RH with the 2 clips.
| 7.
INSTALL REAR FLOOR FINISH PLATE (w/ Clearance Sonar System)
|
 |
- Engage the 7 clips and install the rear floor finish plate.
| 8.
INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Clearance Sonar System)
|
 |
- Install the 2 No. 1 luggage compartment trim hooks with the 2 screws.
| 9.
INSTALL SPARE WHEEL COVER ASSEMBLY (w/ Clearance Sonar System) |
|
| 10.
INSTALL SPARE WHEEL COVER CLAMP (w/ Clearance Sonar System) |
|
| 11.
INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Clearance Sonar System) |
|