2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Jun 2006 – May 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. INSTALL REAR SPOILER

HINT:
When installing the spoiler, heat the vehicle body and spoiler using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Spoiler
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body and rear spoiler excessively.

  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the rear spoiler. (If reusing the rear spoiler)

    1. Using a heat light, heat the rear spoiler.

    2. Remove the double-sided tape from the rear spoiler.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the rear spoiler.

      B137017E01

  1. B137018
    Install the rear spoiler.

    1. Using a heat light, heat the vehicle body and rear spoiler.

    2. Remove the release paper from the rear spoiler.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Engage the 4 clips and install the rear spoiler with the 2 nuts.


2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

  1. B135465
    Install the luggage compartment door cover with the 13 clips.

← REMOVAL (from Jun 2009)INSTALLATION (from Jun 2009) →