2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL REAR DOOR BELT MOULDING ASSEMBLY

  1. B137004
    Engage the clip and 6 claws, and install the rear door belt moulding assembly.


2. INSTALL REAR DOOR INNER GLASS WEATHERSTRIP

  1. B149019
    Engage the 3 claws to install the rear door inner glass weatherstrip.


3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

  1. B149020
    Engage the claw to install the No. 1 door scuff plate clamp.

  1. Connect each connector.

  1. B136452
    Engage the rear door trim board with the 4 clips of the rear door inner glass weatherstrip.

  1. B136451
    Engage the 7 clips to install the rear door trim board to the rear door panel.

  1. Install the 3 screws.


4. INSTALL DOOR ASSIST GRIP COVER

  1. B136448
    Engage the 6 claws and install the door assist grip cover.


5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG

  1. B136444
    Engage the 3 claws to install the rear door inside handle bezel plug.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →