2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL FRONT DOOR BELT MOULDING ASSEMBLY

  1. B137002
    Engage the 2 clips and 5 claws, and install the front door belt moulding assembly.


2. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY

  1. B149066
    Install the outer rear view mirror assembly with the 3 nuts.

    Torque:
    4.5 N*m{ 46 kgf*cm , 40 in.*lbf }

  1. Connect the connector.


3. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

  1. B136876
    Engage the 4 claws and install the front door inner glass weatherstrip.


4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect each connector.

  1. B136402
    Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.

  1. B132840E01
    Engage the 9 clips and install the front door trim board to the front door panel.

  1. Install the 3 screws and clip (A).


5. INSTALL ASSIST GRIP COVER

  1. B132837
    Engage the 6 claws and install the assist grip cover.


6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

  1. B132835
    Engage the 3 claws and install the front door inside handle bezel plug.


7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

  1. B132833
    Engage the 2 clips and install the front door lower frame bracket garnish.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →