2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE BATTERY

  1. A134906
    Loosen the bolt and nut, and remove the battery clamp.

  1. Remove the battery and battery tray.


3. REMOVE AIR CLEANER INLET ASSEMBLY

  1. A134903
    Remove the 2 bolts, clamp and air cleaner inlet.


4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

  1. A144946E01
    Disconnect the mass air flow meter connector (*1).

  1. Disconnect the purge VSV connector (*2).

  1. Disconnect the 2 purge VSV vacuum hoses (*3).

  1. Disconnect the purge line hose from the clamp (*4).

  1. A146036
    Disconnect the No. 2 ventilation hose from the air cleaner hose.

  1. A135668
    Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.

  1. A146037
    Remove the 2 bolts and air cleaner cap.

  1. Remove the air cleaner filter element from the air cleaner case.


5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

  1. A134905
    Disconnect the hose clamp.

  1. Remove the 3 bolts and air cleaner case.


6. REMOVE SPEED SENSOR (NT SENSOR)

  1. C135106
    Disconnect the speed sensor connector.

  1. Remove the bolt and speed sensor.

  1. Remove the O-ring from the speed sensor.


7. REMOVE SPEED SENSOR (NC SENSOR)

  1. C135107
    Disconnect the speed sensor connector.

  1. Remove the bolt and speed sensor.

  1. Remove the O-ring from the speed sensor.

← COMPONENTS (from Jun 2006)REMOVAL (Oct 2006 – May 2009) →