Panel Switches do not Function
Circuit diagnosis · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK PANEL SWITCH |
 |
Check for foreign matter around the switches that might prevent operation.
- OK:
- No foreign matter is found.
|
NG |
 |
|
| REMOVE ANY FOREIGN MATTER FOUND |
|
|
| OK |
|
 |
|
| 2. CHECK PANEL SWITCH (OPERATION CHECK) |
 |
- Enter the "Panel&Steering Switch Check Mode" screen (Check Panel & Steering Switch) (Click here).
Operate the abnormal switch and check if the switch name and status are correctly displayed.
- OK:
- The switch name and status are correctly displayed as operated.
- Result:
Result
|
Proceed to
|
NG
|
A
|
OK (for 2GR-FE RHD)
|
B
|
OK (except 2GR-FE RHD)
|
C
|
|
B |
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY (for 2GR-FE RHD) (Click here)
|
|
|
|
C |
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY (except 2GR-FE RHD) (Click here)
|
|
|
| A |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|