Illumination for Panel Switch does not Come on with Tail Switch ON
Circuit diagnosis · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE) |
 |
Enter the "Display Check" mode (Vehicle Signal Check Mode) (Click here).
Check that the display changes between ON and OFF according to the light control switch operation.
- OK:
Light Control Switch
|
Display
|
Tail or head
|
ON
|
Off
|
OFF
|
- HINT:
- This display is updated once per second. As a result, it is normal for the display to lag behind the actual change in the switch.
|
NG |
 |
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|
|
| OK |
|
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY |
|