Vehicle Position Mark Deviates Greatly
Circuit diagnosis · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK GPS MARK |
 |
- Check that the GPS mark is displayed.
- OK:
- GPS mark is displayed.
|
NG |
 |
|
| GO TO "GPS MARK IS NOT DISPLAYED" IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| 2. CHECK VEHICLE SENSOR (OPERATION CHECK) |
 |
- Enter the "Vehicle Sensors" screen (Check GPS&Vehicle Sensors) (Click here).
While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.
- OK:
- The readings are almost equal.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 3. CHECK VEHICLE SIGNAL (OPERATION CHECK) |
 |
Enter the "Vehicle Signal Check Mode" screen (Check Vehicle Signal) (Click here).
- Check that the display changes between ON and OFF according to the shift lever operation.
- OK:
Shift Lever Position
|
Display
|
except R
|
OFF
|
R
|
ON
|
- HINT:
- The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
|
NG |
 |
|
| GO TO "REVERSE SIGNAL DOES NOT CHANGE IN NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|