Screen Flicker or Color Distortion
Circuit diagnosis · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK DISPLAY SETTING |
 |
- Enter the display adjustment screen by pressing the "DISPLAY" switch.
Reset display settings (contrast, brightness) and check that the screen appears normal.
- Press the "INFO" switch and then select "Screen Setting".
- Set the "Switch Color" to "Green" (initial setting) and check if the display returns to normal.
- OK:
- Returns to normal.
|
NG |
 |
|
|
|
| OK |
|
 |
|
|
| 2. CHECK CABIN |
 |
Check that the cabin temperature is warmer than -20°C (-4.0°F).
- OK:
- Cabin is warmer than -20°C (-4.0°F).
|
NG |
 |
|
| HEAT CABIN AND RECHECK TEMPERATURE |
|
|
| OK |
|
 |
|
| 3. CHECK COLOR BAR (DISPLAY CHECK MODE) |
 |
- Enter the "Display Check" mode (Color Bar Check) (Click here).
Check that the color bars match the displayed names.
- OK:
- Color bars match the displayed names.
|
NG |
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY |
|
|
| OK |
|
 |
|
| 4. CHECK NAVI COLOR BAR (NAVIGATION CHECK MODE) |
 |
Enter the "Navigation Check" mode (NAVI Color Bar Check) (Click here).
Check that the color bars match the displayed names.
- OK:
- Color bars match the displayed names.
|
NG |
 |
|
| REPLACE NAVIGATION RECEIVER ASSEMBLY |
|
|
| OK |
|
 |
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|