2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Screen Flicker or Color Distortion

Circuit diagnosis · Vehicles built from Jun 2009

INSPECTION PROCEDURE


1. CHECK DISPLAY SETTING
  1. Enter the display quality adjustment screen.

  1. Reset display settings (contrast, brightness) and check that the screen appears normal.

    OK:
    Returns to normal.



NG
Go to step 2
OK

END

2. CHECK CABIN
  1. Check that the cabin temperature is higher than -20°C (-4.0°F).

    OK:
    Cabin is warmer than -20°C (-4.0°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3. CHECK COLOR BAR (OPERATION CHECK)

  1. Enter "Function Check/Setting" mode (Color Bar Check Mode) (Click here).E194885

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.

    Result:
    Result
    Proceed to
    OK
    A
    NG
    (for 2GR-FE RHD)
    B
    NG
    (except 2GR-FE RHD)
    C



B
REPLACE RADIO AND DISPLAY ASSEMBLY (for 2GR-FE RHD) (Click here)

C
REPLACE RADIO AND DISPLAY ASSEMBLY (except 2GR-FE RHD) (Click here)
A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Panel Switches do not Function (from Jun 2009)Poor Sound Quality in All Modes (Low Volume) (from Jun 2009) →