Components
|
Function
|
Power seat motor assembly (slide motor)
|
Activated based on a signal from the position control ECU and slides the seat forward and rearward.
|
Power seat motor assembly (reclining motor)
|
Activated based on a signal from the position control ECU and tilts and reclines the seat.
|
Power seat motor assembly (front vertical motor)
|
Activated based on a signal from the position control ECU and raises and lowers the seat cushion front vertically.
|
Power seat motor assembly (lifter motor)
|
Activated based on a signal from the position control ECU and raises and lowers the seat cushion vertically.
|
Lumbar support adjuster motor
|
Activated based on a signal from the lumbar front power seat switch and adjusts the lumbar support.
|
Front power seat switch (reclining, lifter, slide, front vertical)
|
Based on switches operated, the seat adjuster signals are input in the position control ECU and the seat is adjusted accordingly.
|
Lumbar front power seat switch
|
Based on switches operated, the seat is adjusted accordingly.
|
Seat memory switch (driver side) (SET switch, memory switch)
|
When the SET switch and the SW1 or SW2 switch are pressed simultaneously, a signal is input to the outer mirror control ECU and sent to the position control ECU, which records the seat position and outer mirror position (RH and LH). When the SW1 or SW2 switch is pressed, a signal is input to the outer mirror control ECU and sent to the position control ECU, which changes the seat position and outer mirror position (RH and LH) to each recorded position.
|