2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


CHECK MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)
B112605E07
  1. Disconnect the E6, E7, IO, IK, IM, ID, IA, IF, IJ, and E9 J/B and ECU connectors.

  2. Measure the voltage and resistance according to the value(s) in the table below.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    DCTY (E7-24) - Body ground
    L(*1), Y(*2) - Body ground
    Driver door courtesy switch
    Driver door CLOSED → OPEN
    10 kΩ or higher → Below 1 Ω
    RCTY (E6-5) - Body ground(*3)
    RCTY (E6-7) - Body ground(*4)
    GR - Body ground
    Rear right door courtesy switch input
    Rear right door CLOSED → OPEN
    10 kΩ or higher → Below 1 Ω
    PCTY (E6-21) - Body ground
    Y(*1), L(*2) - Body ground
    Passenger door courtesy switch input
    Passenger door CLOSED → OPEN
    10 kΩ or higher → Below 1 Ω
    LCTY (IO-7) - Body ground
    LG - Body ground
    Rear left door courtesy switch input
    Rear left door CLOSED → OPEN
    10 kΩ or higher → Below 1 Ω
    GND2 (IM-9) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    ACC (IF-2) - Body ground
    L - Body ground
    Power supply
    Ignition switch on (ACC)
    10 to 14 V
    IG (IF-11) - Body ground
    B - Body ground
    Power supply
    Ignition switch on (IG)
    10 to 14 V
    GND1 (IF-10) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    L1 (IJ-3) - Body ground(*2)
    L - Body ground
    Driver door control switch LOCK input
    Driver door control switch OFF → LOCK
    10 kΩ or higher → Below 1 Ω
    UL1 (IJ-4) - Body ground(*1)
    G - Body ground
    Driver door control switch UNLOCK input
    Driver door control switch OFF → UNLOCK
    10 kΩ or higher → Below 1 Ω
    L1 (IK-15) - Body ground(*1)
    V - Body ground
    Driver door control switch LOCK input
    Driver door control switch OFF → LOCK
    10 kΩ or higher → Below 1 Ω
    UL1 (IK-12) - Body ground(*2)
    G - Body ground
    Driver door control switch UNLOCK input
    Driver door control switch OFF → UNLOCK
    10 kΩ or higher → Below 1 Ω
    UL1 (IK-12) - Body ground(*1)
    G - Body ground
    Passenger side door control switch UNLOCK input
    Passenger side door control switch OFF → UNLOCK
    10 kΩ or higher → Below 1 Ω
    L1 (IJ-3) - Body ground(*1)
    L - Body ground
    Passenger side door control switch LOCK input
    Passenger side door control switch OFF → LOCK
    10 kΩ or higher → Below 1 Ω
    KSW (E9-5) - Body ground(*3)
    B - Body ground
    Unlock warning switch signal input
    No key is in ignition key cylinder → Key is in ignition key cylinder
    10 kΩ or higher → Below 1 Ω
    LGCY (E6-25) - Body ground
    W - Body ground
    Luggage compartment door courtesy switch input
    Luggage compartment door CLOSED → OPEN
    10 kΩ or higher → Below 1 Ω
    BECU (ID-10) - Body ground
    BE - Body ground
    +B (BECU) power supply
    Always
    10 to 14 V
    *1: for LHD
    *2: for RHD
    *3: without Smart Entry and Start System
    *4: with Smart Entry and Start System
    If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the J/B and ECU connectors.

  4. Measure the voltage according to the value(s) in the table below.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    LSWP (E6-27) - Body ground(*6)
    L - Body ground
    Rear left door lock position switch input
    Rear left door UNLOCK → LOCK(*5)
    Below 1 V →
    10 to 14 V (or pulse generation)
    LSWP (E6-27) - Body ground(*6)
    L - Body ground
    Rear right door lock position switch input
    Rear right door UNLOCK → LOCK(*5)
    Below 1 V →
    10 to 14 V (or pulse generation)
    LSWP (E6-27) - Body ground
    LG(*1), L(*2) - Body ground
    Passenger door lock position switch input
    Passenger door UNLOCK → LOCK(*5)
    Below 1 V →
    10 to 14 V (or pulse generation)
    LSWD (E7-9) - Body ground
    L(*1), Y(*2) - Body ground
    Driver door lock position switch input
    Driver door UNLOCK → LOCK
    Below 1 V →
    10 to 14 V (or pulse generation)
    LSWL (IP-5) - Body ground(*8)
    GR - Body ground
    Rear left door lock position switch input
    Rear left door UNLOCK → LOCK
    Below 1 V →
    10 to 14 V (or pulse generation)
    LSWR (E6-5) - Body ground(*8)
    V - Body ground
    Rear right door lock position switch input
    Rear right door UNLOCK → LOCK
    Below 1 V →
    10 to 14 V (or pulse generation)
    UL3 (E7-10) - Body ground
    GR - Body ground
    Driver door key-linked door unlock input
    Using mechanical key, operate driver door lock cylinder to LOCK → UNLOCK
    Below 1 V →
    10 to 14 V (or pulse generation)
    L2 (IK-16) - Body ground(*1)
    BR - Body ground
    Driver door key-linked door lock input
    Using mechanical key, operate driver door lock cylinder to UNLOCK → LOCK
    Below 1 V →
    10 to 14 V (or pulse generation)
    UL2 (IK-7) - Body ground(*7)
    GR - Body ground
    Front passenger door key-linked door unlock input
    Using mechanical key, operate passenger door lock cylinder to LOCK → UNLOCK
    Below 1 V →
    10 to 14 V (or pulse generation)
    L2 (IJ-5) - Body ground(*7)
    W - Body ground
    Front passenger door key-linked door lock input
    Using mechanical key, operate passenger door lock cylinder to UNLOCK → LOCK
    Below 1 V →
    10 to 14 V (or pulse generation)
    L2 (IJ-5) - Body ground(*2)
    W - Body ground
    Driver door key-linked door lock input
    Using mechanical key, operate driver door lock cylinder to UNLOCK → LOCK
    Below 1 V →
    10 to 14 V (or pulse generation)
    ACT+ (IJ-1) - Body ground
    L - Body ground
    Door lock motor LOCK drive output (Front door RH)
    Door control switch (Master switch or passenger side switch(*1)) or driver door key cylinder OFF → LOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    ACT+ (IP-11) - Body ground
    W - Body ground
    Door lock motor LOCK drive output (Rear door LH)
    Door control switch (Master switch or passenger side switch(*1)) or driver door key cylinder OFF → LOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    ACT+ (IF-5) - Body ground
    L - Body ground
    Door lock motor LOCK drive output (Rear door RH)
    Door control switch (Master switch or passenger side switch(*1)) or driver door key cylinder OFF → LOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    ACT- (IP-6) - Body ground
    G - Body ground
    Door lock motor UNLOCK drive output (Rear door LH)
    Door control switch (Master switch or passenger side switch(*1)) or driver door key cylinder OFF → UNLOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    ACT- (IF-18) - Body ground
    B - Body ground
    Door lock motor UNLOCK drive output (Rear door RH)
    Door control switch (Master switch or passenger side switch(*1)) or driver door key cylinder OFF → UNLOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    TR+ (E7-1) - Body ground
    B - Body ground
    Door lock motor UNLOCK drive output (Luggage compartment door)
    Luggage compartment open switch (Transmitter) or luggage compartment door key cylinder OFF → UNLOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    ACTD (E7-5) - Body ground
    GR(*1), LG(*2) - Body ground
    Door lock motor UNLOCK drive output (Driver door)
    Door control switch (Master switch or passenger side switch) or driver door key cylinder OFF → UNLOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    ACT+ (IK-2) - Body ground
    W - Body ground
    Door lock motor LOCK drive output (Front door LH)
    Door control switch (Master switch or passenger side switch(*1)) or driver door key cylinder OFF → LOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    ACT- (IJ-2) - Body ground
    LG - Body ground
    Door lock motor UNLOCK drive output (Front passenger)
    Door control switch (Master switch or passenger side switch(*1)) or driver door key cylinder OFF → UNLOCK → OFF
    Below 1 V →
    10 to 14 V →
    Below 1 V
    *1: LHD
    *2: RHD
    *5: When the front passenger side door, rear left door or rear right door is unlocked, the LSWP terminal will be ON. In this case, perform the inspection with the other doors locked.
    *6: RHD without Smart Entry and Start System
    *7: without Wireless Door Lock Control System
    *8: with Smart Entry and Start System
    If the result is not as specified, the main body ECU (instrument panel J/B) may have a malfunction.

← TERMINALS OF ECU (Jun 2006 – May 2009)DIAGNOSIS SYSTEM (Jun 2006 – May 2009) →