REMOVAL
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use the same procedure for the RH side and LH side.
- The procedure listed below are for the LH side.
| 1.
PRECAUTION |
 |
- CAUTION:
- Be sure to read "PRECAUTION" thoroughly before servicing (Click here).
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
| 3.
REMOVE ENGINE UNDER COVER RH |
|
| 4.
REMOVE ENGINE UNDER COVER LH |
|
| 5.
REMOVE FRONT AIRBAG SENSOR |
 |
- Remove the bolt and front airbag sensor from the body.
Disconnect the connector from the front airbag sensor.