2006-2011 Camry Aurion · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

CAUTION:
Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.


1. REMOVE RECLINING POWER SEAT SWITCH KNOB

  1. B147696E01
    Using a screwdriver, detach the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B147697E01
    Using a screwdriver, detach the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY

  1. B147624
    Disengage the 2 hooks.

  1. B147698
    Remove the 5 screws.

  1. Disengage the 2 claws and separate the front seat cushion shield assembly.

  1. Disconnect the connector from the front power seat lumbar switch.


4. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD

  1. B165269
    Remove the screw.

  1. Disengage the 2 claws and remove the front inner No. 1 seat cushion shield.


5. REMOVE FRONT POWER SEAT LUMBAR SWITCH

  1. B165270
    Remove the 2 screws and front power seat lumbar switch.


6. REMOVE FRONT INNER SEAT CUSHION SHIELD

  1. B165271
    Remove the screw.

  1. Disengage the 3 claws and remove the front inner seat cushion shield.


7. REMOVE FRONT SEAT INNER BELT ASSEMBLY

  1. B147624
    for LHD:

    1. Disengage the 2 hooks.

    2. B151312E01
      Disconnect the connectors and disengage each clamp.

    3. Disconnect the connector. (for Driver Seat)

    4. Remove the nut and front seat inner belt assembly.

      B151321E01

  1. B152833
    for RHD Driver Seat:

    1. Disengage the 2 hooks.

    2. B151313E03
      Disconnect the connector and disengage the 3 clamps.

    3. B236439
      Disconnect the connector.

    4. Remove the nut and front seat inner belt assembly.

  1. for RHD Passenger Seat:

    1. Disengage the 2 hooks.

    2. Disconnect the connector and disengage the 3 clamps.

    3. B236437
      Remove the nut and front seat inner belt assembly.


8. REMOVE POWER SEAT SWITCH

  1. B165272
    Remove the 3 screws.

  1. Disconnect the connector and remove the power seat switch.


9. REMOVE FRONT SEAT CUSHION ASSEMBLY

  1. B165273
    Disengage the connector.

  1. Remove the 4 hooks.

  1. B165274E01
    Using a screwdriver, disengage the hooks and remove the front seat cushion assembly.


10. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER (for Except Sports Seat Type)

  1. B146659E01
    Remove the 14 hog rings and front separate type seat cushion cover from the seat cushion pad.


11. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER (for Sports Seat Type)

  1. B144026E01
    Remove the 17 hog rings and front separate type seat cushion cover from the seat cushion pad.


12. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY (for Except Sports Seat Type)

  1. B165275
    Remove the 2 screws.

  1. Disengage the 4 claws and front seatback board sub-assembly.


13. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY (for Sports Seat Type)

  1. B134682E01
    Remove the 2 screws.

  1. Disconnect the 14 clamps and front separate type seatback cover.

  1. Pull the seatback board in the direction indicated by the arrow in the illustration to detach the 2 claws. Then, remove the front seatback board subassembly.


14. REMOVE FRONT SEAT HEADREST SUPPORT

  1. B146662
    Disengage the 2 claws and remove the front seat headrest support.

    HINT:
    Use the same procedure for the RH side and LH side.


15. REMOVE FRONT SEATBACK ASSEMBLY (for Except Sports Seat Type)

  1. B165276E01
    Remove the 3 hog rings.

  1. B148651E01
    Remove the 5 hog rings.

  1. Disengage the 6 hooks.

  1. B165277
    Remove the nut and separate the 2 brackets.

  1. Remove the front seatback assembly.


16. REMOVE FRONT SEATBACK ASSEMBLY (for Sports Seat Type)

  1. B149564
    Disengage the 3 hooks.

  1. B139110E01
    Remove the 2 hog rings.

  1. B165277
    Remove the nut and separate the 2 brackets.

  1. Remove the front seatback assembly.


17. REMOVE FRONT SEPARATE TYPE SEATBACK COVER (for Except Sports Seat Type)

  1. B146665E01
    Remove the 12 hog rings and front separate type seatback cover from the seatback pad.


18. REMOVE FRONT SEPARATE TYPE SEATBACK COVER (for Sports Seat Type)

  1. B144025E01
    Remove the 14 hog rings and front separate type seatback cover from the seatback pad.


19. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY

  1. B165278
    Disconnect the connector.

  1. Remove the 2 screws and lumbar support adjuster assembly.


20. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER RH

  1. B146667
    Remove the screw and lower reclining adjuster inside cover RH.


21. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH

  1. B148630
    Remove the screw and lower reclining adjuster inside cover LH.


22. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH

  1. B148631
    Remove the screw.

  1. Disengage the claw and remove the upper reclining adjuster inside cover RH.


23. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH

  1. B148632
    Remove the screw.

  1. Disengage the claw and remove the upper reclining adjuster inside cover LH.


24. REMOVE FRONT LOWER SEAT CUSHION SHIELD LH

  1. B148633
    Remove the screw.

  1. Disengage the 2 claws and remove the front lower seat cushion shield LH.


25. REMOVE FRONT LOWER SEAT CUSHION SHIELD RH

  1. B148634
    Remove the screw.

  1. Disengage the 2 claws and remove the front lower seat cushion shield RH.


26. REMOVE FRONT SEPARATE TYPE SEATBACK SPRING ASSEMBLY

  1. B165296E01
    Disconnect the connector and detach the 3 clamps.

  1. B148636
    Remove the 4 bolts and front separate type seat back spring assembly.


27. REMOVE SEAT POSITION SENSOR (for Driver Seat)

  1. C133891
    Disconnect the connector.

  1. Using a "TORX" socket (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.

  1. C133892
    Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.


28. REMOVE FRONT SEAT WIRE
  1. Detach the each clamp and each claw and remove the front seat wire.

← DISASSEMBLY (Oct 2006 – May 2009)REASSEMBLY (Oct 2006 – May 2009) →