INSTALLATION
Removal / installation · Vehicles built from Jun 2006
| 1.
INSTALL REAR SEATBACK ASSEMBLY |
 |
- Place the seatback in the cabin.
- NOTICE:
- Be careful not to damage the vehicle body.
Install the rear seatback assembly with the 4 bolts.
-
Torque:
- 18 N*m{
184 kgf*cm
, 13 ft.*lbf
}
- Pass the 3 seat belts through and close the cap of the 2 rear seat shoulder belt guides.
Install the floor anchor part with the bolt.
| 2.
INSTALL REAR CENTER SEAT HEADREST ASSEMBLY |
|
| 3.
INSTALL REAR SEAT HEADREST ASSEMBLY |
|
| 4.
INSTALL REAR SEAT CUSHION ASSEMBLY |
 |
- Attach the 2 front hooks of the seat cushion to the vehicle body.
Confirm that the seat cushion is firmly installed.
- NOTICE:
- When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.