2006-2011 Camry Aurion · Service Manual STEERING

REASSEMBLY

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 from Oct 2006


1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY

  1. C104552E03
    Engage the 2 claws to install the ignition or starter switch assembly to the steering lock sub-assembly.


2. INSTALL KEY INTERLOCK SOLENOID (for Automatic Transaxle)

  1. C104553
    Install the key interlock solenoid to the steering lock sub-assembly with the 2 screws.


3. INSTALL UN-LOCK WARNING SWITCH ASSEMBLY

  1. C104837E02
    Engage the 2 claws to install the un-lock warning switch assembly to the steering lock sub-assembly.


4. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY
  1. Make sure that the ignition switch lock cylinder assembly is in the ACC position.

  1. C103932E02
    Install the ignition switch lock cylinder assembly to the steering lock sub-assembly.

  1. Make sure that the ignition switch lock cylinder assembly is securely installed.


5. INSPECT STEERING LOCK OPERATION

  1. C103934
    Check that the steering lock mechanism is activated when the key is removed.

  1. C103935E02
    Check that the steering lock mechanism is deactivated when the key is inserted and turned to the ACC position.

    HINT:
    If there is any abnormality, replace the ignition switch lock cylinder assembly.


6. INSTALL STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY
  1. Temporarily install the assembled steering lock and its bracket to the steering column assembly with 2 new tapered-head bolts.

  1. C143942
    Tighten the 2 tapered-head bolts until the bolt heads break off.


7. INSTALL TRANSPONDER KEY AMPLIFIER
  1. Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into position.

  1. C115570
    Push the transponder key amplifier to install it to the upper bracket.

    NOTICE:
    Do not push the amplifier with excessive force.

← INSPECTION (from Oct 2006)REASSEMBLY (from Oct 2006) →