FAIL-SAFE CHART
System information · Vehicles built Jun 2006 – Sep 2006
| FAIL-SAFE FUNCTION |
When communication fails in any of the CAN bus wires (communication lines) due to a short circuit or other causes, a fail-safe function(s) will operate. The fail-safe function that is specified for each system operates to prevent those systems from malfunctioning.
The following chart shows the relationships between components, system functions, and effects of communication failure on these functions. (For further details, see the pages for each system.)
*: with VSCFunction
Control Master
System Related
Condition When Communication Impossible
DTC Detection (Driver Detectable)
VSC control* (Controls driving force while VSC in operation)
Skid Control ECU
- ECM
- Steering Angle Sensor
- Yaw Rate Sensor
Control is inoperative (VSC control gradually stops)
U0073, U0100, U0123 U0124, U0126 (VSC warning light comes on)
ABS control (Controls driving force while ABS in operation)
Skid Control ECU
-
Control is inoperative (ABS control gradually stops)
U0073, U0129 (ABS warning light comes on)
Air conditioning control
Air Conditioning Amplifier
- ECM
- Combination Meter
- Main Body ECU
Air conditioning function stops
B1499 (Air conditioning inoperative)
Buzzer control
Combination Meter
- ECM
- Skid Control ECU
- Center Airbag Sensor Assembly
Buzzer function stops
U0100, U0129 (Buzzer does not sound)
Illumination control
Main Body ECU
- ECM
- Combination Meter
Light illumination rheostat inoperative
None (Rheostat inoperative)
Meter display
Combination Meter
- ECM
- Skid Control ECU
- Center Airbag Sensor Assembly
- Main Body ECU
Light does not come on, illuminates abnormally, or blinks abnormally
U0100, U0129 (Abnormal display)
- ECM