2006-2011 Camry Aurion · Service Manual BODY

REPAIR

Removal / installation · Vehicles built from Jun 2006


1. REPAIR WINDOW DEFOGGER WIRE

B106758E03
  1. Clean the broken wire tips with a grease, wax and silicone remover.

  1. Place the masking tape along both sides of the wire.

  1. B106759
    Thoroughly mix the repair agent (Dupont paste No. 4817 or equivalent).

  1. Using a fine tip brush, apply a small amount of the agent to the wire.

  1. After a few minutes, remove the masking tape.

    NOTICE:
    Do not repair the defogger wire again for at least 24 hours.

← ON-VEHICLE INSPECTION (from Oct 2006)Rear Window Defogger System does not Operate (Jun 2006 – Sep 2006) →