2006-2011 Camry Aurion · Service Manual BODY

DISPOSAL

Removal / installation · Vehicles built from Jun 2006


1. DISPOSE OF HOOD SUPPORT ASSEMBLY

  1. B127037E01
    Secure the hood support horizontally in a vise with the piston-rod pulled out.

  1. Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.

    NOTICE:
    Although the gas inside the hood support is colorless, odorless, and harmless, metal debris may scatter. Therefore, cover the hood support with a piece of cloth or other material.

← INSTALLATION (from Jun 2006)COMPONENTS (Jun 2006 – May 2009) →