INSPECTION
Inspection · Vehicles built from Oct 2006
| INSPECT SEAT MEMORY SWITCH |
Measure the resistance according to the value(s) in the table below.

- Standard resistance:
Tester Connection
Switch Position
Specified Condition
E88-1 (MRY) - E88-4 (E)
SET switch is pressed
Below 1 Ω
SET switch is not pressed
10 kΩ or higher
E88-3 (M2) - E88-4 (E)
M2 switch is pressed
Below 1 Ω
M2 switch is not pressed
10 kΩ or higher
E88-2 (M1) - E88-4 (E)
M1 switch is pressed
Below 1 Ω
M1 switch is not pressed
10 kΩ or higher
If the result is not as specified, replace the seat memory switch.
