HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use the following procedure to troubleshoot the defogger system.
- The intelligent tester should be used in step 4.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| NEXT |
|
 |
|
|
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
| NEXT |
|
 |
|
|
- HINT:
- (Click here).
| NEXT |
|
 |
|
|
| 4.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (Click here).
Data List/Active Test (Click here).
On-vehicle inspection (Click here).
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|