INSPECTION
Inspection · Vehicles built from Oct 2006
| INSPECT REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY |
Connect the 3 dry cell batteries (1.5 V) in series.

Connect the positive (+) lead from the battery to terminal 3, and the negative (-) lead from the battery to terminal 1.
Measure the voltage between terminals 2 and 1 while slowly moving the link up and down.
- Standard voltage:
Tester Connection
Condition
Specified Condition
2 (SHRR) - 1 (SHG)
+45° (High)
Approx. 4.05 V
0° (Normal)
Approx. 2.25 V
-45° (Low)
Approx. 0.45 V
