2006-2011 Camry Aurion · Service Manual STEERING

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Oct 2006


DESCRIPTION
  1. The steering lock system locks or unlocks the steering lock by activating the steering lock bar with a motor. The steering lock ECU activates the motor based on signals from the certification ECU and main body ECU.

  2. A LIN (Local Interconnect Network) is used for communication between different ECUs in this system.


FUNCTIONS OF COMPONENTS
  1. The steering lock ECU controls the system based on information from the following components.

    Item
    Function
    Steering lock actuator assembly
    Consists of a motor, lock bar, lock and unlock position sensors, etc. Activated by the steering lock ECU.
    Steering lock ECU
    Included in the steering lock actuator assembly. This ECU activates the steering lock motor based on permission signals from the main body ECU and certification ECU.
    Detects steering lock or unlock information and transmits this information to other ECUs.
    Main body ECU
    Permits the steering lock ECU to supply power to activate the motor. The main body ECU and certification ECU permit engine start after receiving an unlock signal from the steering lock ECU.
    Certification ECU
    Orders the steering lock ECU to lock/unlock the steering. The main body ECU and certification ECU permit engine start after receiving an unlock signal from the steering lock ECU.
    IG2 relay
    Controlled by the main body ECU. This ECU sends IG signals to the steering lock ECU.

← SYSTEM DIAGRAM (from Oct 2006)HOW TO PROCEED WITH TROUBLESHOOTING (Oct 2006 – May 2009) →