2006-2011 Camry Aurion · Service Manual STEERING

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Oct 2006


CHECK FOR DTCS
A132338E01
  1. Prepare the intelligent tester.

  2. Connect the intelligent tester to the DLC3 at the lower part of the instrument panel.

  3. Turn the engine switch on (IG) and turn the intelligent tester on.

  4. Use the intelligent tester to check for DTCs, and note or print the result (see the operator's manual for operating instructions).

  5. Confirm the details of the DTCs (Click here).


CLEAR DTCS
  1. Operate the intelligent tester to clear the DTCs (see the operator's manual for operating instructions).

← DIAGNOSIS SYSTEM (from Jun 2009)DATA LIST / ACTIVE TEST (from Oct 2006) →