DISASSEMBLY
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| 1.
REMOVE MAGNET STARTER SWITCH ASSEMBLY |
 |
- Remove the nut and disconnect the lead wire from the magnet starter switch.
- Remove the 2 nuts holding the magnet starter switch to the repair service starter kit.
Remove the magnet starter switch.
| 2.
REMOVE STARTER YOKE ASSEMBLY |
 |
- Remove the 2 through bolts, and pull out the starter yoke together with the starter commutator end frame.
- Remove the starter yoke from the starter commutator end frame.
| 3.
REMOVE STARTER ARMATURE PLATE |
 |
- Remove the starter armature plate from the starter yoke.
| 4.
REMOVE STARTER COMMUTATOR END FRAME COVER |
 |
- Using a screwdriver, pry out the starter commutator end frame cover to remove it.
| 5.
REMOVE STARTER ARMATURE ASSEMBLY |
 |
- Using snap ring pliers, remove the snap ring and washer.
- NOTICE:
- Do not drop the starter armature.
Remove the starter armature from the starter commutator end frame.
| 6.
REMOVE RUBBER SEAL |
 |
- Remove the rubber seal from the repair service starter kit.
| 7.
REMOVE PLANETARY GEAR |
 |
- Remove the 3 planetary gears from the repair service starter kit.