The driver's door lock motor is built into the driver's door lock assembly. The main body ECU (instrument panel J/B) controls the driver's door lock motor to lock/unlock the driver's door. This main body ECU (instrument panel J/B) applies current from terminal ACT+ to terminal ACTD to operate the motor to lock the door. It reverses the direction of the current flow to operate the motor to unlock the door.
WIRING DIAGRAM
INSPECTION PROCEDURE
1. INSPECT FRONT DOOR LOCK ASSEMBLY (DOOR LOCK MOTOR)
Remove the front door lock assembly (driver side) (Click here).
Apply battery voltage and check operation of the door lock motor.