REMOVAL
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE BATTERY
|
 |
- Loosen the bolt and nut, and remove the battery clamp.
Remove the battery and battery tray.
| 3.
SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY |
 |
- Remove the nut from the control shaft lever.
Disconnect the transmission control cable assembly from the control shaft lever.
- Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.
- NOTICE:
- Do not hold the resin guide pipe.
| 4.
REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
 |
- Disconnect the park/neutral position switch connector.
- Remove the nut, washer and control shaft lever.
- Using a screwdriver, pry up the lock plate.
- Remove the lock nut and the lock plate.
- Remove the 2 bolts and pull out the park/neutral position switch.