2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

HINT:
Click here.


2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

  1. C091925
    Remove the 18 bolts, oil pan and gasket.

    NOTICE:
    Some fluid will remain in the oil pan. remove all the pan bolts, and carefully remove the oil pan assembly.

  1. D030865E01
    Remove the 2 magnets from the oil pan.

  1. AT00103
    Examine particles in the pan.

    1. Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the pan and on the magnets to see the type of wear which might be found in the transaxle.

      Result:
      Steel (magnetic):
      bearing, gear and plate wear
      Brass (non-magnetic):
      bearing wear


3. DISCONNECT TRANSMISSION WIRE

  1. C135717
    Disconnect the 7 shift solenoid valve connectors.

  1. Remove the bolt and lock plate, and disconnect the ATF temperature sensor.


4. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

  1. C135715
    Remove the 3 bolts and oil strainer.

    NOTICE:
    Be careful that some fluid will come out of the oil strainer.

  1. C135716
    Remove the O-ring from the oil strainer.


5. REMOVE TRANSMISSION VALVE BODY ASSEMBLY

  1. C091933
    Support the valve body assembly and remove the 17 bolts and the valve body assembly.

    NOTICE:
    Be careful not to drop the check ball, spring and accumulator piston.

  1. C050017
    Remove the check ball body and spring.


6. REMOVE MANUAL VALVE
  1. Remove the manual valve from the valve body assembly.

← COMPONENTS (from Jun 2006)REMOVAL (Oct 2006 – May 2009) →