REMOVAL
Removal / installation · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE AIR CONDITIONING UNIT |
 |
- HINT:
-
Click here.
| 2.
REMOVE BATTERY
|
 |
- Loosen the bolt and nut, and remove the battery clamp.
Remove the battery and battery tray.
| 3.
REMOVE AIR CLEANER INLET ASSEMBLY
|
 |
- Remove the 2 bolts, clamp and air cleaner inlet.
| 4.
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
|
 |
- Disconnect the mass air flow meter connector (*1).
Disconnect the purge VSV connector (*2).
Disconnect the 2 purge VSV vacuum hoses (*3).
Disconnect the purge line hose from the clamp (*4).
- Disconnect the No. 2 ventilation hose from the air cleaner hose.
- Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.
- Remove the 2 bolts and air cleaner cap.
Remove the air cleaner filter element from the air cleaner case.
| 5.
REMOVE AIR CLEANER CASE SUB-ASSEMBLY
|
 |
- Disconnect the hose clamp.
Remove the 3 bolts and air cleaner case.
| 6.
REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
 |
- Disconnect the transmission control cable assembly from the transmission shift lever assembly while pushing the 2 claws of the floor shift cable.
Turn back the carpet.
- Remove the 2 bolts and disconnect the No. 2 shift cable grommet retainer.
Remove the No. 2 shift cable grommet retainer.
- Remove the nut from the control shaft lever.
Disconnect the transmission control cable assembly from the control shaft lever.
- Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.
- Disconnect the transmission control cable assembly from the control cable clamp.
Pull out the transmission control cable assembly from the body.