2006-2011 Camry Aurion · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. REMOVE FRONT PLANETARY GEAR NUT

  1. D003686E01
    Using SST and a hammer, loosen the staked part of the lock nut.
    SST
    09930-00010   (09931-00010, 09931-00020)
    09387-00050  
    09495-65040  

  1. C134896E01
    Clamp the underdrive planetary gear in a soft jaw vise.

    NOTICE:
    Be careful not to damage the differential drive pinion.

  1. C134897E01
    Using a socket wrench, remove the lock nut.


2. REMOVE CYLINDRICAL ROLLER BEARING RACE INNER

  1. D003689E01
    Using SST, remove the cylindrical roller bearing race inner.
    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00320)


3. REMOVE UNDERDRIVE PLANETARY GEAR ASSEMBLY

  1. C134898E01
    Using SST and a press, remove the differential drive pinion, parking lock gear, counter driven gear with underdrive planetary ring gear, and angular ball bearing.
    SST
    09387-00050  
    09495-65040  
    09950-60010   (09951-00320)
    09950-70010   (09951-07100)

  1. C134899E01
    Clamp the underdrive planetary gear in a soft jaw vise.

  1. Using SST, remove the rear angular ball bearing from the underdrive planetary gear.

    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00320)


4. REMOVE UNDERDRIVE PLANETARY RING GEAR

  1. C134900E01
    Using snap ring pliers, remove the snap ring.

  1. C137499E01
    Remove the underdrive planetary ring gear from the counter driven gear.

← COMPONENTS (from Jun 2006)INSPECTION (from Jun 2006) →