DISASSEMBLY
Removal / installation · Vehicles built from Jun 2006
| 1.
REMOVE 4TH DRIVEN GEAR |
 |
- Using SST and a press, remove the output shaft rear bearing (inner race) and 4th driven gear.
- SST
- 09950-00020
| 2.
REMOVE OUTPUT GEAR SPACER |
 |
- Remove the output gear spacer from the output shaft.
| 3.
REMOVE 2ND GEAR |
 |
- Using SST and a press, remove the 3rd driven gear and 2nd gear from the output shaft.
- SST
- 09950-00020
| 4.
REMOVE NO. 2 SYNCHRONIZER RING SET |
 |
- Remove the No. 2 synchronizer ring set from the No. 1 transmission clutch hub.
| 5.
REMOVE 2ND GEAR NEEDLE ROLLER BEARING |
 |
- Remove the 2nd gear needle roller bearing from the output shaft.
| 6.
REMOVE 2ND GEAR BEARING SPACER |
 |
- Remove the 2nd gear bearing spacer from the output shaft.
| 7.
REMOVE 2ND GEAR BUSHING |
 |
- Remove the 2nd gear bushing from the output shaft.
| 8.
REMOVE 2ND GEAR BUSHING BALL |
 |
- Using a magnetic finger, remove the 2nd gear bush ball from the output shaft.
| 9.
REMOVE 1ST GEAR |
 |
- Using SST and a press, remove the No. 1 transmission clutch hub and 1st gear from the output shaft.
- SST
- 09950-00020
| 10.
REMOVE NO. 1 SYNCHRONIZER RING SET |
 |
- Remove the No. 1 synchronizer ring set from the 1st gear.
| 11.
REMOVE 1ST GEAR NEEDLE ROLLER BEARING |
 |
- Remove the 1st gear needle roller bearing from the output shaft.
| 12.
REMOVE OUTPUT SHAFT FRONT BEARING |
 |
- Using SST and a press, remove the output shaft front bearing (inner race) from the output shaft.
- SST
- 09950-00020
09950-60010
(09951-00320)
09950-70010
(09951-07150)
- NOTICE:
- Do not overtighten the SST.
| 13.
REMOVE REVERSE GEAR |
 |
- Remove the No. 1 transmission clutch hub, 3 No. 1 synchromesh shifting keys, and 3 No. 1 synchromesh shifting key springs from the reverse gear.