DISASSEMBLY
Removal / installation · Vehicles built from Jun 2006
| 1. REMOVE SPEEDOMETER DRIVE GEAR |
Remove the speedometer drive gear from the front differential case assembly.

| 2. REMOVE FRONT DIFFERENTIAL RING GEAR |
Put matchmarks on the front differential ring gear and the front differential case.

Remove the 16 bolts.

Using a plastic hammer, remove the front differential case.
| 3. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN |
Using SST and a hammer, unstake the staked part of the front differential case.

- SST
- 09930-00010
Using a pin punch and a hammer, remove the front differential pinion shaft straight pin from the front differential case.

| 4. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT |
Remove the No. 1 front differential pinion shaft from the front differential case.

| 5. REMOVE FRONT DIFFERENTIAL SIDE GEAR |
Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears, and 2 No. 1 front differential side gear thrust washers from the front differential case.

- HINT:
- Remove the 2 pinion thrust washers and side gear thrust washers while turning the front differential pinion.
