2006-2011 Camry Aurion · Service Manual SECURITIES

ECU Power Source Circuit

Circuit diagnosis · Vehicles built from Jun 2006

DESCRIPTION

This circuit provides power for main body ECU operation.

WIRING DIAGRAM

B139475E02

INSPECTION PROCEDURE


1. CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (MAIN BODY ECU) (POWER SOURCE)

  1. B110545E02
    Disconnect the ID J/B connector.

  1. Measure the voltage according to the value(s) in the table below.

    Standard voltage:
    Tester Connection
    Specified Condition
    ID-10 - Body ground
    10 to 14 V



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


2. CHECK HARNESS AND CONNECTOR (INSTRUMENT PANEL J/B - BODY GROUND)

  1. B110543E02
    Disconnect the IF and IM J/B connectors.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Symbol (Tester Connection)
    Specified Condition
    IF-10 - Body ground
    Below 1 Ω
    IM-9 - Body ground



NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE


← Security Indicator Light Circuit (from Oct 2006)COMPONENTS (Jun 2006 – Sep 2006) →