HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Jun 2009
- HINT:
- Use the following procedure to troubleshoot the audio and visual system (for radio and display type).
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.DIAGNOSTIC QUESTIONING AND SYMPTOM CONFIRMATION |
Ask the customer about symptoms and confirm malfunctions.
| |||||
| 3.PROBLEM SYMPTOMS TABLE |
Find the applicable symptom in Problem Symptoms Table.
- HINT:
- If the symptom does not recur and no code is output, perform the symptom reproduction method (Click here).
|
||||
|
| 4.CHECK ECU TERMINAL ARRANGEMENT BASED ON MALFUNCTION SYMPTOM |
Terminals of ECU (Click here)
| |||||
| 5.CHECK CIRCUIT |
Adjust, repair or replace as necessary.
| |||||
| 6.PERFORM CONFIRMATION TEST |
| |||||