2006-2011 Camry Aurion · Service Manual SUSPENSION & AXLE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. SECURE REAR SHOCK ABSORBER WITH COIL SPRING

  1. C113438E01
    As shown in the illustration, secure the rear shock absorber with coil spring in a vise using aluminum plates by closing the vise onto the double nutted bolt affixed to the bracket at the bottom of the absorber.


2. REMOVE REAR SHOCK ABSORBER

  1. C132466E01
    Using SST, compress the rear coil spring.
    SST
    09727-30021   (09727-00010, 09727-00021, 09727-00031)

    NOTICE:
    Do not use an impact wrench.

    HINT:
    If the rear coil spring is compressed at an angle, using 2 SST will make the work easier.

  1. Remove the lock nut.

  1. Remove the rear shock absorber collar and rear suspension support assembly.

  1. Remove the rear coil spring, No. 1 rear spring bumper, and lower rear coil spring insulator.

← REMOVAL (from Jun 2006)INSPECTION (from Jun 2006) →