2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Oct 2006


POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION
  1. The power door lock system locks/unlocks all the doors.
    The master switch and the door control switch on the passenger door send "lock/unlock" request signals to the main body ECU (instrument panel J/B). Then, the main body ECU sends these request signals to the lock motors in each door to lock/unlock all the doors at once in response to the inputs.
    Operating the driver's door lock using a mechanical key sends request signals to lock/unlock the doors to the main body ECU (instrument panel J/B).


FUNCTION OF MAIN COMPONENT
Components
Function
Power window master switch (Manual door lock switch)
Door control switch on master switch assembly locks/unlocks all doors.
Door control switch*1
Door control switch on passenger side door locks/unlocks all doors.
Door courtesy switch
Placed on each door. Detects door status (open or closed) and outputs data to main body ECU (instrument panel J/B). Turns on when door is open and turns off when door is closed.
Driver side door lock
  1. Built-in motor locks/unlocks door.
  2. Built-in door control switch (key-linked) detects door key operation's door status (locked or unlocked) and outputs data to main body ECU (instrument panel J/B).
  3. Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU (instrument panel J/B). This switch turns off when door is locked and turns on when door is unlocked.
Front passenger side door lock
  1. Built-in motor locks/unlocks door.
  2. Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU (instrument panel J/B). This switch turns off when door is locked and turns on when door is unlocked.
Rear LH and RH door locks
  1. Built-in motor locks/unlocks door.
  2. Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU (instrument panel J/B). This switch turns off when door is locked and turns on when door is unlocked.*2
Luggage compartment door lock
Built-in motor locks/unlocks door.

HINT:
*1: for LHD
*2: for RHD


SYSTEM FUNCTION

HINT:
The following function's default settings are ON. Some of these functions can be customized (Click here).

  1. This system is controlled by the main body ECU (instrument panel J/B). The main body ECU (instrument panel J/B) outputs signals to each door lock motor. The door lock control system of the vehicle has the following functions:

    Function
    Outline
    Manual lock and unlock function
    This function can lock or unlock all doors by the door lock control switch operation.
    Key-linked lock and unlock function
    This function, which is linked with the key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected.
    Manual unlock prohibition function
    Performing the door lock operation with an electrical key (*1) or a mechanical key (transmitter) will prohibit the unlock operation by the door lock control switch.
    Key lock-in prevention function (Electrical key)
    If each door lock (*1) or driver's door lock (*2) operation is performed when the electrical key (*1) or mechanical key is in the cabin (*1) or ignition key cylinder (*2), all the doors will be unlocked.
    2-step unlock function
    This function is provided to unlock the driver's door by turning the key cylinder once and to unlock the remaining doors by turning it twice.

    HINT:
    *1: with Smart Entry and Start System
    *2: without Smart Entry and Start System

← SYSTEM DIAGRAM (from Oct 2006)HOW TO PROCEED WITH TROUBLESHOOTING (from Oct 2006) →