Door LOCK Position Circuit
Circuit diagnosis · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
DESCRIPTION
The main body ECU receives driver side, passenger side, rear LH side, and rear RH side door lock position switch signals to control the illuminated entry system and light auto turn off system.WIRING DIAGRAM




INSPECTION PROCEDURE
| 1. READ VALUE USING INTELLIGENT TESTER |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester main switch on.
Select the items below in the DATA LIST, and read the display on the intelligent tester.
Main Body (Main Body ECU): (without Smart Entry and Start System) Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D-Door Lock Pos SW
Driver side door lock position switch signal / ON or OFF
ON: Driver side door is unlocked
OFF: Driver side door is locked
-
P-Door Lock Pos SW
Passenger side or rear RH or rear LH door lock position switch signal / ON or OFF
ON: Passenger side door or rear LH door or rear RH door is unlocked
OFF: Passenger side door and rear LH door and rear RH door doors are locked
-
Main Body (Main Body ECU): (with Smart Entry and Start System) Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D-Door Lock Pos SW
Driver side door lock position switch signal / ON or OFF
ON: Driver side door is unlocked
OFF: Driver side door is locked
-
P- Door Lock Pos SW
Passenger side door lock position switch signal / ON or OFF
ON: Passenger side door is unlocked
OFF: Passenger side door is locked
-
RR-Door Lock Pos SW
Rear right door lock position switch signal / ON or OFF
ON: Rear right door is unlocked
OFF: Rear right door is locked
-
RL-Door Lock Pos SW
Rear left door lock position switch signal / ON or OFF
ON: Rear left door is unlocked
OFF: Rear left door is locked
-
- OK:
- Normal conditions listed above are displayed.
|
|
||||
| OK | ||
| ||
