DATA LIST / ACTIVE TEST
System information · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 from Oct 2006
| USING INTELLIGENT TESTER |
Connect the intelligent tester to the DLC3.
Monitor the ECU data by following the prompts on the tester screen.
- HINT:
- The intelligent tester has a "Snapshot" function which records the monitored data. Refer to the intelligent tester operator's manual for further details.
| DATA LIST |
- HINT:
- Using the DATA LIST displayed on the intelligent tester, the value of the switches, sensors, actuators, etc. can be read without part removal. Reading the DATA LIST as the first step in troubleshooting is one way to shorten the labor time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Read the DATA LIST according to the display on the tester.
D Door Motor: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D Door Auto SW
Driver door power window auto switch signal/ON or OFF
ON: Driver door power window auto switch operates
OFF: Driver door power window auto switch does not operate
-
D Door P/W Up SW
Driver door power window manual up switch signal/ON or OFF
ON: Driver door power window manual up switch operates
OFF: Driver door power window manual up switch does not operate
-
D Door P/W Down SW
Driver door power window manual down switch signal/ON or OFF
ON: Driver door power window manual down switch operates
OFF: Driver door power window manual down switch does not operate
-
Body: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Communication Master SW
Power window ECU communication signal OK/STOP
OK: Communication is normal
STOP: Communication is stop
-
Ignition Switch
Ignition switch signal/ON or OFF
ON: Ignition switch is on
OFF: Ignition switch is off or ACC
-
D Door Courtesy SW
Driver side door courtesy switch signal/ON or OFF
ON: Driver side door is open
OFF: Driver side door is closed
-
P Door Courtesy SW
Front passenger side door courtesy switch signal/ON or OFF
ON: Front passenger side door is open
OFF: Front passenger side door is closed
-
| ACTIVE TEST |
- HINT:
- Performing the ACTIVE TEST using the intelligent tester allows you to operate the relay, VSV, actuator, etc. without parts removal. Performing the ACTIVE TEST as the first step in troubleshooting is one way to shorten the labor time. It is possible to display the DATA LIST during the ACTIVE TEST.
Connect the intelligent tester to the DLC3.
Turn the ignition switch to the ON position.
Perform the ACTIVE TEST according to the display on the tester.
D Door Motor: Tester Display
Measurement Item/Range
Normal Condition
Power window
Operates power window UP/DOWN
-
Body: Tester Display
Measurement Item/Range
Normal Condition
IG OFF P/W Control Permission Output
Operates power window ON/OFF (After ignition switch is turned OFF)
-