2006-2011 Camry Aurion · Service Manual RESTRAINTS

DATA LIST / ACTIVE TEST

System information · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 from Oct 2006


ACTIVE TEST
Performing the ACTIVE TEST using the intelligent tester allows the meters, indicators and so on to operate without removing any parts. Performing the ACTIVE TEST as the first step in troubleshooting is one way to shorten labor time.
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. From the display on the tester, select the "ACTIVE TEST".

    METER: 
    Tester Display
    Measurement Item/Range
    Normal Condition
    D-BELT REMIND
    D-SEAT BELT indicator light (OFF/ON)
    Confirm that the vehicle is stopped with the engine idling
    P-BELT REMIND*
    P-SEAT BELT indicator light (OFF/ON)
    Confirm that the vehicle is stopped with the engine idling
    1. *: w/ Front Passenger Side Seat Belt Warning

← DIAGNOSIS SYSTEM (from Oct 2006)DATA LIST / ACTIVE TEST (from Oct 2006) →