2006-2011 Camry Aurion · Service Manual SUSPENSION & AXLE

REPLACEMENT

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE REAR WHEEL

2. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY

  1. C083014E02
    Remove the bolt and separate the flexible hose from the shock absorber.

  1. C138223
    Remove the 2 bolts and separate the rear disc brake caliper assembly.

    NOTICE:
    Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.


3. REMOVE REAR DISC

  1. C143446E02
    Put matchmarks on the rear disc and the axle hub.

  1. C131914E02
    Release the parking brake and remove the rear disc.

    HINT:
    If the disc cannot be removed easily, turn and press the shoe adjuster firmly until the wheel comes free.


4. REMOVE REAR AXLE HUB BOLT

  1. C224311E01
    Temporarily install the 2 nuts and washers to the rear axle hub bolt as shown in the illustration.

  1. Using SST and a brass bar or an equivalent tool to hold the hub and bearing assembly, remove the rear axle hub bolt.

    SST
    09628-10011  


5. INSTALL REAR AXLE HUB BOLT

  1. C224313E01
    Install a washer and nut to a new bolt as shown in the illustration.

  1. Using a brass bar or an equivalent tool to hold the hub and bearing assembly, install the rear axle hub bolt by tightening the nut.


6. INSTALL REAR DISC

  1. C143446E01
    Aligning the matchmarks, install the rear disc.

    HINT:
    When replacing the rear disc with a new one, select the installation position where the rear disc has the minimum runout.


7. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY

  1. C138223
    Install the rear disc brake caliper with the 2 bolts.

    Torque:
    47 N*m{ 479 kgf*cm , 35 ft.*lbf }

    NOTICE:
    Do not twist the brake hose when installing the rear disc brake caliper assembly LH.

  1. C083014E03
    Install the rear flexible hose with the bolt.

    Torque:
    19 N*m{ 192 kgf*cm , 14 ft.*lbf }


8. INSTALL REAR WHEEL

Torque:
103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }

← REPLACEMENT (Oct 2006 – May 2009)COMPONENTS (Jun 2006 – May 2009) →