SYSTEM DESCRIPTION
Troubleshooting · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| WIRELESS DOOR LOCK CONTROL SYSTEM |
| FUNCTION OF MAIN COMPONENTS |
| Component |
Function |
| Door control transmitter |
|
| Door control receiver |
Receives weak radio waves (recognition codes and function codes) and outputs them as code data to the main body ECU. |
|
Turns on when a door is opened and turns off when it is closed. Outputs door status codes (open or closed) to the main body ECU. |
| Unlock warning switch |
Detects if the key is inserted in the ignition key cylinder or not. |
| Door lock position switch |
Transmits the door lock positions of each door to the main body ECU. |
| Wireless door lock buzzer |
Emits beep (answer back) when doors are locked or unlocked, or luggage compartment door is opened by wireless operation. |
| Main body ECU |
Sends wireless door lock control signals in response to the code data from the door control receiver and signals from each switch. |
| SYSTEM FUNCTION |
The wireless door lock control system has the following functions:
- HINT:
- The default settings of the following functions are ON. Part of these functions can be customized (Click here).
| Function |
Operation |
| All door lock |
Pressing the LOCK switch locks all doors. |
| All door unlock |
Pressing the UNLOCK switch unlocks all doors. |
| All door unlock (2-step unlock) |
Pressing the UNLOCK switch twice within 3 seconds unlocks all the doors after the driver's door is unlocked. (Default setting is off.) |
| Automatic lock |
If none of the doors is opened within 30 seconds after they are unlocked by the wireless door lock control, all the doors will lock again automatically. |
| Panic alarm |
Pressing the PANIC switch of the transmitter for longer than about 0.8 seconds causes the following alarms to activate:
|
| Luggage compartment door opener |
Pressing the LUGGAGE OPEN switch of the transmitter opens the luggage compartment door. |
| Answer back |
|
| Door ajar warning |
The buzzer sounds when LOCK is pressed when any of the doors are ajar. When all the doors are closed or when UNLOCK is pressed, the buzzer will stop after it sounds for 10 seconds continuously. |
| Illuminated entry |
When all the doors are locked, pressing UNLOCK causes the interior lights to come on simultaneously with the unlock operation. |
| Self-diagnostic mode |
The following are ways to enter the self-diagnostic mode:
|
| Transmitter recognition code registration |
Enables the registration (writing and storing) of 6 types of transmitter recognition codes in the EEPROM that is contained in the door control receiver. |
| TRANSMITTER RECOGNITION CODE REGISTRATION FUNCTION |
| Mode |
Function |
| Add mode |
Adds a newly received code while preserving any previously registered codes. This mode is used when adding a new transmitter. If the number of registered codes exceeds 6, the oldest registered code is erased first. |
| Rewrite mode |
Erases all previously registered codes and registers only newly input codes. |
| Confirmation mode |
Confirms how many codes are currently registered. When adding a new code, this mode is used to check how many codes already exist. |
| Prohibition mode |
Deletes all the registered codes and disables the wireless door lock function. This mode is used when the transmitter is lost. |
| CONDITIONS THAT WIRELESS FUNCTIONS DO NOT OPERATE |
Lock operation is not available when:
- Any of the doors is open.
- The key is inserted in the ignition key cylinder.
- Any of the doors is open.
Unlock operation is not available when:
- The key is inserted in the ignition key cylinder.
- The key is inserted in the ignition key cylinder.
Luggage compartment door opener is not available when:
- The key is inserted in the ignition key cylinder.
- The key is inserted in the ignition key cylinder.