2006-2011 Camry Aurion · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2006


1. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

  1. A135682
    Remove the 4 bolts and No. 1 exhaust manifold heat insulator.


2. REMOVE AIR FUEL RATIO SENSOR

  1. A135681E01
    Disconnect the air fuel ratio sensor connector and clamp.

  1. A135683E01
    Using SST, remove the air fuel ratio sensor from the No. 2 exhaust manifold converter sub-assembly.
    SST
    09224-00010  

    NOTICE:
    Do not damage the air fuel ratio sensor.

← COMPONENTS (from Jun 2006)INSPECTION (from Jun 2006) →