2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

Circuit diagnosis · Vehicles built from Jun 2009

INSPECTION PROCEDURE


1. CHECK CELLULAR PHONE
  1. Check if the voice on the other side can be heard using a cellular phone.

    OK:
    Voice can be heard.



NG
REPAIR OR REPLACE CELLULAR PHONE
OK


2. CHECK AUDIO SYSTEM
  1. Check that sound from the audio system can be heard from the driver side speaker.

    OK:
    Sound from the audio system can be heard.

    HINT:
    If sound from the audio system cannot be heard, proceed to "No sound can be heard from speakers. (Audio is mute.)" in Problem Symptoms Table (Click here).



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK


3. CHECK SETTINGS
  1. Check that the received voice level setting on the cellular phone is not too low.

    OK:
    The received voice level setting is not too low.



NG
SET VOLUME TO HIGH
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Cannot Call in a Certain Place (from Jun 2009)The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted (from Jun 2009) →