INSPECTION
Inspection · Vehicles built from Oct 2006
Versions by build date: Jun 2006 – Sep 2006 from Oct 2006
| INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/ Memory) |
Inspect outer mirror motor operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 5 (MV)
Battery negative (-) → Terminal 10 (M+)
Turns upward (A)
Battery positive (+) → Terminal 10 (M+)
Battery negative (-) → Terminal 5 (MV)
Turns downward (B)
Battery positive (+) → Terminal 4 (MH)
Battery negative (-) → Terminal 10 (M+)
Turns left (C)
Battery positive (+) → Terminal 10 (M+)
Battery negative (-) → Terminal 4 (MH)
Turns right (D)
| INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/ Memory) |
Inspect outer mirror motor operation.

Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 5 (MV)
Battery negative (-) → Terminal 10 (M+)
Turns upward (A)
Battery positive (+) → Terminal 10 (M+)
Battery negative (-) → Terminal 5 (MV)
Turns downward (B)
Battery positive (+) → Terminal 4 (MH)
Battery negative (-) → Terminal 10 (M+)
Turns left (C)
Battery positive (+) → Terminal 10 (M+)
Battery negative (-) → Terminal 4 (MH)
Turns right (D)
| INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (w/o Memory) |
Inspect outer mirror motor operation.

for 2AZ-FE: Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 3 (MV)
Battery negative (-) → Terminal 2 (M+)
Turns upward (A)
Battery positive (+) → Terminal 2 (M+)
Battery negative (-) → Terminal 3 (MV)
Turns downward (B)
Battery positive (+) → Terminal 1 (MH)
Battery negative (-) → Terminal 2 (M+)
Turns left (C)
Battery positive (+) → Terminal 2 (M+)
Battery negative (-) → Terminal 1 (MH)
Turns right (D)
2GR-FE: Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 4 (MV)
Battery negative (-) → Terminal 3 (M+)
Turns upward (A)
Battery positive (+) → Terminal 3 (M+)
Battery negative (-) → Terminal 4 (MV)
Turns downward (B)
Battery positive (+) → Terminal 5 (MH)
Battery negative (-) → Terminal 3 (M+)
Turns left (C)
Battery positive (+) → Terminal 3 (M+)
Battery negative (-) → Terminal 5 (MH)
Turns right (D)
| INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (w/o Memory) |
Inspect outer mirror motor operation.

for 2AZ-FE: Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 3 (MV)
Battery negative (-) → Terminal 2 (M+)
Turns upward (A)
Battery positive (+) → Terminal 2 (M+)
Battery negative (-) → Terminal 3 (MV)
Turns downward (B)
Battery positive (+) → Terminal 1 (MH)
Battery negative (-) → Terminal 2 (M+)
Turns left (C)
Battery positive (+) → Terminal 2 (M+)
Battery negative (-) → Terminal 1 (MH)
Turns right (D)
for 2GR-FE: Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.

- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 4 (MV)
Battery negative (-) → Terminal 3 (M+)
Turns upward (A)
Battery positive (+) → Terminal 3 (M+)
Battery negative (-) → Terminal 4 (MV)
Turns downward (B)
Battery positive (+) → Terminal 5 (MH)
Battery negative (-) → Terminal 3 (M+)
Turns left (C)
Battery positive (+) → Terminal 3 (M+)
Battery negative (-) → Terminal 5 (MH)
Turns right (D)
