2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE AIR CLEANER INLET ASSEMBLY

  1. A134903
    Remove the 2 bolts, clamp and air cleaner inlet.


3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

  1. A144946E01
    Disconnect the mass air flow meter connector (*1).

  1. Disconnect the purge VSV connector (*2).

  1. Disconnect the 2 purge VSV vacuum hoses (*3).

  1. Disconnect the purge line hose from the clamp (*4).

  1. A146036
    Disconnect the No. 2 ventilation hose from the air cleaner hose.

  1. A135668
    Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.

  1. A146037
    Remove the 2 bolts and air cleaner cap.

  1. Remove the air cleaner filter element from the air cleaner case.


4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

  1. A134905
    Disconnect the hose clamp.

  1. Remove the 3 bolts and air cleaner case.


5. REMOVE CLUTCH ACCUMULATOR BRACKET

  1. C132974
    Remove the 2 bolts and clutch accumulator bracket.


6. REMOVE RELEASE CYLINDER HEAT INSULATOR

  1. C132975
    Remove the 2 bolts and release cylinder heat insulator.


7. DISCONNECT CLUTCH LINE

  1. C132976E01
    Using SST, disconnect the clutch lines.
    SST
    09023-00101  

    HINT:
    Use a container to catch the fluid.


8. REMOVE CLUTCH ACCUMULATOR ASSEMBLY

  1. C132977
    Remove the 2 nuts and clutch accumulator assembly.


9. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY

  1. C135415
    Remove the 2 bolts and clutch release cylinder assembly.

← COMPONENTS (from Jun 2006)REMOVAL (Oct 2006 – May 2009) →