INSPECTION
Inspection · Vehicles built from Jun 2006
| INSPECT FUSE (HORN) |
Check the resistance of the HORN fuse.
- Standard resistance:
- Below 1 Ω
| INSPECT HORN RELAY |
Remove the engine room R/B and J/B (horn relay).
Measure the resistance according to the value(s) in the table below.


- Standard resistance:
Tester Connection
Condition
Specified Condition
1G-1 - 1B-6
When battery voltage is not applied to terminals 1G-1 and 1D-10
10 kΩ or higher
1G-1 - 1B-6
When battery voltage is applied to terminals 1G-1 and 1D-10
Below 1 Ω
